Ubuntu 12.04 on Nico Maas

[RaspPi] How To Compile OpenWRT Trunk with latest Raspberry Pi Kernel 3.10 for the RPi on Ubuntu 12.04

Thu, 27 Apr 2017 12:00:25 +0000

EDIT: This post is from 30.09.2013 and should be the “how to” to this post. However, I never released it for a now unknown reason. Because of the interest in this topic, I still will publish it today so that it can stand as some kind of documentation of what I did back then. However, I might not work anymore.

This is the latest Guide.

What are we doing here?
Building OpenWRT Trunk with the offical RPi 3.10 (next) Kernel.

[RaspPi] Build Raspberry Pi Kernel 3.10 / NEXT for Debian Wheezy / Raspbian with eGalax Touchscreen Support on Ubuntu 12.04

Thu, 12 Sep 2013 19:26:33 +0000

This is about building the latest Kernel / 3.10 for RPi. Bleeding Edge.

Preperations

sudo apt-get install git libncurses5 libncurses5-dev qt4-dev-tools qt4-qmake pkg-config build-essential gcc-arm-linux-gnueabi bc  
# NEEDS BC!!!!

Clone Stuff

mkdir rpi_kernel_10  
cd rpi_kernel_10  
git clone https://github.com/raspberrypi/tools.git  
git clone https://github.com/raspberrypi/linux.git  
cd ~/rpi_kernel_10/linux/.git  
git branch -a  
cd ~/rpi_kernel_10/linux  
git checkout -t -b rpi-3.10.y remotes/origin/rpi-3.10.y  
git pull  
cd ~/rpi_kernel_10  
git clone https://github.com/raspberrypi/firmware.git  
cd ~/rpi_kernel_10/firmware/.git  
git branch -a  
cd ~/rpi_kernel_10/firmware  
git checkout -t -b next remotes/origin/next  
git pull  
cd ~/rpi_kernel_10

Make Kernel

cd linux  
make mrproper  
mkdir ../kernel  
# Kernel Types  
# find . -name \*bcmrpi\*config -print  
# ./arch/arm/configs/bcmrpi_emergency_defconfig  
# ./arch/arm/configs/bcmrpi_defconfig  
# ./arch/arm/configs/bcmrpi_cutdown_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcmrpi_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig #xconfig  
#Device Drivers->Input Device Support->TouchScreens->USB Touchscreen Driver (Build it into or as module, check if eGalax here!)  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -k -j3  
cd ../  
cd tools/mkimage  
./imagetool-uncompressed.py ../../kernel/arch/arm/boot/Image  
cd ../../

Make Modules

cd kernel  
mkdir ../modules/  
make modules_install ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- INSTALL_MOD_PATH=../modules/

Install Kernel on existing RPi SD Card / Raspbian

# mount sdcard in your Ubuntu (I made an folder sdb1 for boot partiton and sdb2 for the root partition)  
cd ~  
mkdir sdb1 sdb2  
mount /dev/sdb1 sdb1  
mount /dev/sdb2 sdb2

# boot partition  
#replace /sdb1/boot/bootcode.bin with rpi_kernel_10/firmware/boot/bootcode.bin  
sudo rm ~/sdb1/bootcode.bin  
cp ~/rpi_kernel_10/firmware/boot/bootcode.bin ~/sdb1/  
#replace /sdb1/boot/kernel.img with the previously created kernel image  
sudo rm ~/sdb1/kernel.img  
cp ~/rpi_kernel_10/tools/mkimage/kernel.img ~/sdb1/  
#replace /sdb1/boot/start.elf with rpi_kernel_10/firmware/boot/start.elf  
sudo rm ~/sdb1/start.elf  
cp ~/rpi_kernel_10/firmware/boot/start.elf ~/sdb1/

# root partition  
#replace /sdb2/lib/firmware with <modules_builded_above_folder>/lib/firmware  
sudo rm -rf ~/sdb2/lib/firmware/  
sudo cp -a ~/rpi_kernel_10/modules/lib/firmware/ ~/sdb2/lib/  
#replace /sdb2/lib/modules with <modules_builded_above_folder>/lib/modules  
sudo rm -rf ~/sdb2/lib/modules/  
sudo cp -a ~/rpi_kernel_10/modules/lib/modules/ ~/sdb2/lib/  
#replace /sdb2/opt/vc with firmware-next/hardfp/opt/vc/  
sudo rm -rf ~/sdb2/opt/vc  
sudo cp -a ~/rpi_kernel_10/firmware/hardfp/opt/vc/ ~/sdb2/opt/

# sync usb mount  
sync

# Unmount sdcard  
cd ~  
umount sdb1  
umount sdb2

Boot Pi and calibrate Touchscreen

This stuff happens on the Pi!

Preperations

sudo apt-get install libx11-dev libxext-dev libxi-dev x11proto-input-dev

Install Tool / xinput_calibrator

cd ~  
wget http://github.com/downloads/tias/xinput_calibrator/xinput_calibrator-0.7.5.tar.gz  
tar -xvzf xinput_calibrator-0.7.5.tar.gz  
cd xinput_calibrator-0.7.5  
./configure  
make  
sudo make install

Calibrate (in Xserver, so open Terminal while beeing in Graphical User Mode)

xinput_calibrator

It will give output like this:

[RaspPi] How To Compile OpenWRT Trunk with latest Raspberry Pi Kernel 3.6 for the RPi on Ubuntu 12.04

Wed, 04 Sep 2013 14:55:36 +0000

What are we doing here?

As far as I understand the problem, there are two worlds:
Raspberry Pi Foundation on the one hand, the OpenWRT Team on the other one.
OpenWRT does try to patch “Default Kernels” until they work out with the intended Plattform, which does work in most cases very well.
The problem is, RPi is an new target for the latest OpenWRT Release - and does work - but it does not get much love of the devs:
No trunk compiles or nightlys of the Image or the packages - i.e.
And - the “so patched Kernel” does not represent the state of the art of the RPi Kernel Development at all:
I got many errors of the “first days of Pi”, like the loved “SDcard error” which corrupted the whole filesystem and such.

[RaspPi] Build Raspberry Pi Kernel for Debian Wheezy / Raspbian with eGalax Touchscreen Support on Ubuntu 12.04

Mon, 02 Sep 2013 14:54:35 +0000

Preperations

sudo apt-get install git libncurses5 libncurses5-dev qt4-dev-tools qt4-qmake pkg-config build-essential gcc-arm-linux-gnueabi bc

Clone Stuff

mkdir rpi_kernel  
cd rpi_kernel  
git clone https://github.com/raspberrypi/tools.git  
git clone https://github.com/raspberrypi/linux.git  
git clone https://github.com/raspberrypi/firmware.git  
cd ~/rpi_kernel/firmware/.git  
git branch -a  
cd ~/rpi_kernel/firmware  
git checkout -t -b next remotes/origin/next  
git pull  
cd ~/rpi_kernel

Make Kernel

cd linux  
make mrproper  
mkdir ../kernel  
# Kernel Types  
# find . -name \*bcmrpi\*config -print  
# ./arch/arm/configs/bcmrpi_emergency_defconfig  
# ./arch/arm/configs/bcmrpi_defconfig  
# ./arch/arm/configs/bcmrpi_cutdown_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcmrpi_defconfig  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig #xconfig  
#Device Drivers->Input Device Support->TouchScreens->USB Touchscreen Driver (Build it into or as module, check if eGalax here!)  
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -k -j3  
cd ../  
cd tools/mkimage  
./imagetool-uncompressed.py ../../kernel/arch/arm/boot/Image  
cd ../../

Make Modules

cd kernel  
mkdir ../modules/  
make modules_install ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- INSTALL_MOD_PATH=../modules/

Install Kernel on existing RPi SD Card / Raspbian

# mount sdcard in your Ubuntu (I made an folder sdb1 for boot partiton and sdb2 for the root partition)  
cd ~  
mkdir sdb1 sdb2  
mount /dev/sdb1 sdb1  
mount /dev/sdb2 sdb2

# backup config  
cp ~/sdb1/config.txt ~/rpi_kernel/  
# boot partition  
sudo rm -rf ~/sdb1/*  
# Copy all Files from boot  
cp -R ~/rpi_kernel/firmware/boot/* ~/sdb1/  
#replace /sdb1/boot/kernel.img with the previously created kernel image  
sudo rm ~/sdb1/kernel.img  
cp ~/rpi_kernel/tools/mkimage/kernel.img ~/sdb1/  
# restore config  
cp ~/rpi_kernel/config.txt ~/sdb1/

# root partition  
#replace /sdb2/lib/firmware with <modules_builded_above_folder>/lib/firmware  
sudo rm -rf ~/sdb2/lib/firmware/  
sudo cp -R ~/rpi_kernel/modules/lib/firmware/ ~/sdb2/lib/  
#replace /sdb2/lib/modules with <modules_builded_above_folder>/lib/modules  
sudo rm -rf ~/sdb2/lib/modules/  
sudo cp -R ~/rpi_kernel/modules/lib/modules/ ~/sdb2/lib/  
#replace /sdb2/opt/vc with firmware-next/hardfp/opt/vc/  
sudo rm -rf ~/sdb2/opt/vc  
sudo cp -R ~/rpi_kernel/firmware/hardfp/opt/vc/ ~/sdb2/opt/

# sync usb mount  
sync

# Unmount sdcard  
cd ~  
umount sdb1  
umount sdb2

Boot Pi and calibrate Touchscreen

# This stuff happens on the Pi!

Preperations

sudo apt-get install libx11-dev libxext-dev libxi-dev x11proto-input-dev

Install Tool / xinput_calibrator

cd ~  
wget http://github.com/downloads/tias/xinput_calibrator/xinput_calibrator-0.7.5.tar.gz  
tar -xvzf xinput_calibrator-0.7.5.tar.gz  
cd xinput_calibrator-0.7.5  
./configure  
make  
sudo make install

Calibrate (in Xserver, so open Terminal while beeing in Graphical User Mode)

xinput_calibrator

It will give output like this: